Netcore Enterprises Inc.GENERAL PRODUCT LINE SUMMARY & ORDERING INFORMATION
PRICING & DELIVERY:
Phone: 1-780-417-8778 or email clintcrick@aol.com (preferred) for pricing and delivery. I will respond with pricing within 1 - 3 days unless I am long hauling across the USA back to Canada or going the other way. Current pricing ranges from $65.00 to $220.00 FOB. Sherwood Park, AB. Wait times can be long if I am on the road selling! Orders ship after I return to Canada, with Fed Ex Ground in the order they are received . Typical "build to order" times are 4 – 6 weeks if I am in Canada. If I have any extra inventory, I can sometimes ship earlier if I am in Canada. Frequently I am on the road doing demos at shops, proving that the covers work 100 times better than anything else and give 100 times the value. I thank you for your patience. You will rewarded with unequalled performance and enduring value. I have solved a problem that has not been solved before. No one seems to believe that it could be done so I still have to prove it with on site demos. The competition all claim their covers work just fine but they do not, can not and will not attempt to do the demos I do, to prove (disprove!) any of their claims. Netore covers never fall off, stay in position, do not block access to any part of the engine bay and do not cause damage to paint or upholstry. Ask the "competition" to do a demo. They never will! They can't! I can! I do! Thank you for your order, your patience and your trust.
GUIDELINES FOR PRODUCT SELECTION:
1) BACKER? If you want the Removeable Launderable artificial sheepskin Backer then order either the RLB-H, RLB-D, or the RLB-DDW . If not, then order either the STD-H, STD-D-H, or the STD-DDW-H.
2) SIZE? Small = STD-H or RLB-H. Medium = STD-D-H or RLB-D. Large = STD-DDW-H or RLB-DDW.
4) ROPES? If the magnet sheath and or hooks will not hold (eg. newer Corvettes, Vipers) and you do not want to use your own tie ropes to attach to the loops or hooks of the cover then I can add ropes (-R) to the cover for you.
Please email or phone for help if you are unsure of the best selection for your needs. I have 30 years of experience and can help.
PRODUCT LINE SUMMARY AND INFORMATION:
DAILY DRIVER LINE:
MSP: Seat Protectors (MSP) are 30 inches wide x 58 inches deep
STD-H: Standard Model Fender Cover with Hooks (STD-H) which adds 3 hooks across the top edge to attach to non metallic, odd shaped fenders and fenders without a vertical inside lip; (eg. Dodge trucks, Escalades, some GMC Silverado trucks) are also 44 x 16 (actual fender skirt coverage).
STD-D-H: Standard Deep Model Fender Cover with Hooks (STD-D-H). This model is the same as the STD-H but is approx 10 inches deeper (44 wide x 26.5 deep) (actual fender skirt coverage) to cover deeper wrap-around front bumper & grills that curve back to the front of the tire eg. Newer Kia vehicles)
STD-DDW-H: Standard Deep Deep Wide Model Fender Cover with Hooks (STD-DDW-H). This model is the same as the STD-D-H but is approx 10 inches deeper (54 wide x 36.5 deep) (actual fender skirt coverage) to cover larger areas such as painted front ends between the fenders)
PLUS: Plus Model Fender Covers (PLUS) with the tool storage pouch are 36 wide x 16 deep (actual fender skirt coverage). This model does not have hooks. The pouch is approx. 5 & 1/2 inches deep with a 5 inch deep opening.
FBGP: The Front Bumper & Grill Protectors (FBGP) are 80 wide x 27 deep.
FMP: The Floor Mat Protectors (FMP) are Black are approx. 20 wide x 30 long
FMS: The Floor Mat Sliders / Sill Protectors (FMS) are irregularly shaped, wider and longer so as to cover the painted door sill area as well as the floor mat area.
*The RLB-H fender cover (below) is frequently purchased by technicians looking for rib cage protection when leaning over hard fenders for extended periods.
HIGH END AUTO LINE:
RLB-H: The RLB-H (with removable, launderable backer, double shock absorbing layer over the fender crown area and with anchoring clips for non metallic fenders. (44 wide x 16 deep skirt). In addition to the magnets in the top edge sheath, this model also has 3 anchoring hooks across the top edge for attaching to plastic or aluminum fendered vehicles eg. newer C class and E class Mercedes or the new aluminum fendered Jaguar or BMW's with composite fenders.
RLB-D: The Vintage Car Model (RLB-D) fender covers (44 wide x 26 deep skirt) (with removable, launderable backer, double shock absorbing layer over the fender crown area and with anchoring clips for non metallic fenders) for the 1950s &1960s &1970s wide fender style fenders, 1963 - 1996 Corvettes & and most Porsches (across the back of Ferrari engine bays). Order Model RLB-D. A stiffener can be inserted in between the upper layers of the removeable liner if desired. (Typically layers of corrugated plastic sign material)
RLB-D-R or RLB-DDW-R: (Corvettes: 1997 – 2006 Model Years: The (RLB-D-R) model (44 x 26) with 3 tie ropes provides good coverage for the fenders of these models. There is no lip to hook the cover over so ropes are provided to wrap around the hood standoff posts etc.) The RLD-DDW-R model provides a greater coverage area. (54 wide x 36 deep skirt)
RLB-DDW: The Vintage Car Model (RLB-DDW) fender covers (54 wide x 36 deep skirt) (with removable, launderable backer, double shock absorbing layer over the fender crown area and with anchoring clips for non metallic fenders) for the 1930s &1940s extra wide and long fender style fenders, 1953 to 1962 Corvettes, Ferraris, Muscle cars and Classics with larger fenders, model number 928 / 968 Porsches. Order Model RLB-DDW. A stiffener can be inserted in between the upper layers of the removeable liner if desired. (Typically layers of corrugated plastic sign material)
REPLACEMENT BACKERS:
BRLBH: Replacement Backer for RLB-H
BRLBD: Replacement Backer for RLB-D
BRLBDDW: Replacement Backer for RLB-DDW
GENERAL:
Expected product lifetime is 5 years plus. Sales to date are approx. 55,000 units.
Click the links at the top for Canadian vs American ordering.