Netcore Enterprises Inc.STANDARD MODEL FENDER COVER (STD)
Standard Fender Cover (STD) : Advantages & Features
This product (44" x 16") has been designed to have the following features:
1) Designed not to come off, mark or scratch paint
2) Designed so clothing glides over the top side OVERGLIDE® coating. You slide over the cover instead of the cover sliding over the paint and causing scratches!
3) Has magnets in a sheath which does NOT contact the paint on the fender's normally exposed surface (attaches to the vertical lip inside the engine bay). Magnets, even when covered, attract and hold sharp metal bits that scratch when moved over the fender surface. Magnets that hold on the normally exposed fender surface are always a bad idea despite what the competition will tell you. They cause scratches guaranteed.
4) Won't rip or tear under normal conditions
5) Tested for brake clean, carb cleaner, varsol, battery acid, brake fluid
6) 1 way magnets (Safe-T-Mag®) ensure safety of computerized engine & test equipment
7) Has a PVC coated cloth core and can be wiped clean on both sides
8) Actual Fender surface coverage is 44 inches wide x 16 inches deep
Multiple, position adjustible, high strength, high holding power, special uni-directional magnets are distributed along the hangar lip to provide one-way gripping strength. The magnets can be moved inside their respective enclosures to customize the gripping positions. Note: It is recommended that the magnets grip on the inside vertical fender lip (LipGrip®) not on the fender itself. This prevents any potential scratching of clearcoats where magnets would contact the paint on the fender. Special 1 way magnets (Safe-T-Mag®) ensure that flux does not radiate into the engine compartment and effect computerized equipment.
Top side OVERGLIDE® technology ensures that mechanics clothing glides over the upper cover surface easing entry and exit into the engine compartment and substantially reducing movement against the fender paint.
Cleanliness: Both sides can be wiped clean. Oil grease or fluids cannot soak through to contact the paint. Both sides are non marking. Laundering is not required. Simply spray with Simple Green to cut the grease and oil films and wipe clean.
Long Service Life: This unit is constructed from a material that has a cloth core and a P.V.C. coating on both sides. CSB 69 industrial nylon thread is used for strength and resistance to wear and tear. The polyurethane coated nylon edge binding can be wiped clean, is strong and won't easily tear. These units are extremely tough, resist wearing and tearing, chemicals (tested for brake clean, carb cleaner, varsol, battery acid, solvents), rotting, and mildew. The magnets do not break and lose less than 1/2 of 1% of their strength per century.
********************
STANDARD DEEP MODEL FENDER COVER (STD-D)
Standard Deep (STD-D) = 44" x 26" beside Standard (STD) = 44" x 16"
Standard Deep Fender Cover: Advantages & Features
1) The STD-D is the same as the STD model above except that it is 10 inches deeper to also cover where the front bumper wraps back to the tire and for wider fender crowns. NB. Some of the wheel well is covered on a narrow fender. If frequent access is required to the wheel well area on a narrow fender, use the STD model.
2) Actual Fender surface coverage is 44 inches wide x 26 inches deep